Configure Ssh - NETGEAR M4100 Series User Manual

• SSL Server Certificate PEM File. SSL Server Certificate file (PEM Encoded)
• SSL DH Weak Encryption Parameter PEM File. SSL Diffie-Hellman Weak Encryption
Parameter file (PEM Encoded)
• SSL DH Strong Encryption Parameter PEM File. SSL Diffie-Hellman Strong
Encryption Parameter file (PEM Encoded)
9. In the Transfer Mode menu, specify the protocol to use to transfer the file:
• TFTP. Trivial File Transfer Protocol
• SFTP. Secure File Transfer Protocol
• SCP. Secure Copy Protocol
10. In the Server Address Type menu, specify either IPv4, IPv6, or DNS to indicate the format
of the TFTP/SFTP/SCP Server Address field.
The factory default is IPv4.
11. In the Server Address field, type the IP address or DNS host name of the server in
accordance with the format indicated by the server address type.
The factory default is the IPv4 address 0.0.0.0.
12. In the Remote File Path field, enter the path of the file to download.
You can enter up to 96 characters. The factory default is blank.
13. In the Remote File Name field, type the name of the file on the TFTP server to download.
You can enter up to 32 characters. The factory default is blank.

Configure SSH


To configure SSH:
1. Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2. Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3. Launch a web browser.
4. Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5. Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
6. Click the Login button.
The web management interface menu displays.
M4100 Series Managed Switch
Manage Device Security
287