Calculations And Judgements Using Inspection Item Data - Omron FQ-CR1 User Manual

4-6 Calculations and Judgements Using Inspection Item Data

You can set inspection item judgement results and measurement data with the Calculation menu command to
use them in basic arithmetic operations and functions. The judgement results of the calculations are reflected
in the overall judgement.
Calculation
Use the Calculation menu command to set the calculation expressions and the judgement parameters for the
calculation results.
Expression
You can get up to 32 expressions. You can also combine expressions.
You can use the following values in calculations.
• Inspection item data (measurement data, reference values, and judgement results)
• Constants
• Other calculation results
Judgement
Upper and lower limit values are used for the judgement of calculation results (D0 to D31). Each calculation
judgement result (J0 to J31) is turned ON if the result falls within the upper and lower limits. The OR logic of
these results will be the overall judgement result JG.
62

Calculations and Judgements Using Inspection Item Data

FQ User's Manual