Table of Contents
Advertisement
In/Out Tab Page
Menu command
Statistical data
Image logging
Data logging
Delete Log
OUT0
OUT1
OUT2
Output polarity
Output mode
Output delay
Output time
BUSY output
BUSY polarity
Input mode
164
Menu Tables
Description
Sets whether to record the number of
measurements and the number of NG
overall judgements.
Sets the parameter to log measurement
image data.
Sets the parameter to log measurement
data from inspection items.
Resets the log data without turning OFF
the power supply.
Used to assign output signals to OUT0,
OUT1, and OUT2.
Sets the ON condition for the OR signal. OK: ON or NG: ON (default)
Sets the output timing for the judgement
result.
When one-shot output mode is selected,
this parameter sets the delay from when
measurement processing is completed
until when the OR signal turns ON.
When one-shot output mode is selected,
this parameter sets the time that the OR
signal is ON.
Specifies when to turn OFF the BUSY
signal after starting measurement pro-
cessing.
Sets the ON condition for the BUSY sig-
nal output.
Specifies whether to use functions other
than scene switching for external parallel
commands.
Setting range
ON (default) or OFF
All, Only NG, or None (default)
All (default), Only NG, or None (default)
---
OR (Total judgement) (default) or OR0
(Item0 judgement) to OR31 (Item31
judgement)
BUSY (default) or OR0 (Item0 judge-
ment) to OR31 (Item31 judgement)
ERROR (default) or OR0 (Item0 judge-
ment) to OR31 (Item31 judgement)
One-shot output or Level output (default) System
0 to 1,000 ms (default: 0 ms)
0 to 1,000 ms (default: 5 ms)
Measurement (default), Data logging,
Image logging, or Result display
BUSY: ON (default), READY: ON
Standard mode (default) or Expanded
mode
Data
Refer-
ence
System
p. 100
System
p. 96
p. 100
System
---
p. 100
System
p. 118
System
System
System
p. 122
p. 120
System
System
System
p. 98
System
p. 122
System
p. 123
FQ User's Manual
Advertisement
Table of Contents
Troubleshooting
