Omron FQ-CR1 User Manual page 66

Examples for Calculation
Calculating the Sum of the Num. of Characters Read for Two 2D-codes in the Region
The sum of the num. of characters read is calculated with the expression below using the two 2D-codes of
inspection item 0 and inspection item 1.
Region 0
• Region 0 (Num. of characters of the 2D-code of inspection item 0): (I0.N)
• Region 1 (Num. of characters of the 2D-code of inspection item 1): (I1.N)
• Total sum of the num. of characters of the 2D-codes = I0.N+I1.N
Procedure (Calculation)
1
Press [Inspect]
Setting Expressions
1
Press [Expression] on the [Settings] Tab Page.
64
Calculations and Judgements Using Inspection Item Data
Region 1

[Calculation].
FQ User's Manual