Omron FQ-CR1 User Manual page 115

Configuring the Operation
The following settings can be selected depending on the system configuration and application.
Type of change
Changing the type of measurement trigger
Changing the output method of the judgement results
Changing the polarity of the BUSY output
Setting the Measurement Trigger
The measurement trigger can be chosen from the following two types:
• One-shot measurement: One measurement is performed for each external trigger.
• Continuous measurement: Measurements are performed continuously.
Performing One Measurement for Each External Trigger
A measurement trigger is input as the TRIG signal from a proximity sensor, PLC, or other external device.
One measurement is performed when the TRIG signal turns ON.
Trigger input Sensor
Wiring
Color Signal
Pink TRIG
Black OUT0 (OR)
Orange OUT1 (BUSY)
FQ User's Manual
Change
Performing continuous measurements
Obtaining individual judgement results
Adjust the judgement output timing
Changing the judgement output ON conditions
Reversing the polarity of the BUSY signal
(1) TRIG signal ON
Or other
device
Description
Trigger signal
Overall judgement (default
assignment)
Processing in progress (default
assignment)
(2) Performs
measurements once
The signals shown at the left are used.
Refer to the following information for signal wiring.
Wiring: p. 26
Controlling/Outputting in Parallel
Reference
p. 115
p. 118
p. 120
p. 122
p. 122
113