Omron FQ-CR1 User Manual page 59

Setup Procedure for 2D-code
Step 1 Selecting the Inspection Item
[Inspect]  [Inspection]
1
Press an unused inspection item number and press
[Add item.].
2
Press [2D-code].
4-3 Configuring Inspection Items: p. 48
Step 2 Teaching
Teaching means to store the region and the 2D-code in the region as master data for the measurement.
1
Press [Teach].
2
Input an image of the 2D-code to be registered.
3
Register master data.
Master data can be registered automatically or manually.
Auto:
Master data is registered using actual codes.Input an image of the applicable 2D-code and press [TEACH] to
read the code and register the result as master data.
Manual:
Up to 32 characters can be registered in a text string.Control codes can also be registered.
Register master data of a text string of up to 32 characters using a software keyboard.
Input a text string and press [TEACH].Check the ASCII table for characters that can be used.Double-byte
characters, single-byte kana characters or control codes cannot be input.
The following characters can be used as wild cards.
*: Wild card of a text string that includes 0 digit.
?: Single-character wild card
ASCII code table: p. 58
FQ User's Manual
57
Reading 2D-codes