Omron FQ-CR1 User Manual page 176

External Data name
reference
number
201+3N Num. of master
(N=0 to data characters
*1
31) N
202+3N Master data N
(N=0 to
31)
*1 Use the ITEMDATA2 command to set and/or acquire a text string.
2D-code
External Data name
reference
number
0 Judgement
5 Index No.
6 Num. of charac-
ters
*1
7 Characters
120 Verification on/
off
121 Verified master
data
122 Partial verif. on/
off
123 Last compared
digit
124 First compared
digit
125 String output on/
off
126 Error string size
(bytes)
*1
127 Error string
128 Partial output on/
off
129 Output last digit
130 Output first digit
174
External Reference Parameters
Setting/Acquisi- Data range
tion
Acqusition only 0 to 32
Settings/Acquisi- 32 characters max.
tion
Setting/Acquisi- Data range
tion
Acquisition only 0: Judgement is OK,
1: Judgement is NG,
13: Teaching not performed error,
14: Figure not registered error,
15: Out of range error
2: Verification OFF,
Acquisition only
or reading error
1: Verification is NG,
0 to 31: Master data No.
Acquisition only 0 to 1024
Acquisition only 32 characters max.
Settings/Acquisi- 0: None
tion 1: Enable
Settings/Acquisi- 0: Verify all master data
tion 1: Verify master data 0
2: Verify master data 1
Settings/Acquisi- 0: None
tion 1: Enable
Settings/Acquisi- 1 to 1024
tion
Settings/Acquisi- 1 to 1024
tion
Settings/Acquisi- 0: None
tion 1: Enable
Settings/Acquisi- 1 to 20
tion
Settings/Acquisi- 20 characters max.
tion
Settings/Acquisi- 0: None
tion 1: Enable
Settings/Acquisi- 1 to 1024
tion
Settings/Acquisi- 1 to 1024
tion
Default Expression Logged data/
text string Judgement
parameter
0 --- ---
None --- ---
Default Expression Logged data/
text string Judgement
parameter
2
JG ---
2
IN ---
0 N Logged data
0 --- ---
0 --- ---
0 --- ---
0 --- ---
1024 --- ---
1 --- ---
0 --- ---
2 --- ---
NG --- ---
0 --- ---
1024 --- ---
1 --- ---
FQ User's Manual