Omron FQ-CR1 User Manual page 54

Note
ASCII code table
The following table shows the ASCII codes that can be used for manual registration of master data and also
for registering characters of Limits.
Lower 4 bits
If more than one master data exist, register each by repeating the procedure above.
Step 3 Adjusting Judgment Parameters

[Inspect] [Inspection]
1
Press [Judgment].
2
Set the range within which the number of characters
and text strings are judged as OK.
Continuous measurements will be performed for the im-
ages that are displayed.
3
Press [OK] to enter the value.
Item
Judgment Parameter
52
Reading Bar Codes
Upper 4 bits
 
[Add item.] [Bar code]
Parameter Setting
Num. of characters 0 to 1024
Characters 32 characters max. (default *)

[Settings] Tab Page
Description
Set the upper and lower limits for an OK
judgment of the number of characters
read.
Set a text string for an OK judgment of
the text string read.
FQ User's Manual