Changing The Scene To Change The Line Process - Omron FQ-CR1 User Manual

7-1 Changing the Scene to Change the Line Process

What Are Scenes?
With an FQ-CR1 Sensor, the inspection items that can be processed at the same time are registered as
scenes. A command input from an external device or a touch panel operation can be used to select a certain
scene.
If a scene is registered for each type of measurement object or inspection, the line process can be changed
simply by changing the scene when the measurement object or inspection changes.
A maximum of 32 scenes can be created.
Example:
Line Process Changes:
Scene 0
Inspection for
product A
• Settings Included with Scenes
The following settings are changed when the scene is changed: Camera image ([Image] Tab Page) and
Inspection Items ([Inspect] Tab Page). The settings related to external I/O specifications that are included in
the output settings and the system settings for the overall Sensor are used for all of the scenes.
Refer to the following information for the data that is included in the scene data.
10-1 Menu Tables: p. 160
90

Changing the Scene to Change the Line Process

Reading the 2D-code of a container
(Inspection item 0: 2D-code)
Reading the 2D-code of a container
(Inspection item 1: 2D-code)
Scene 1
Inspection for
product B
Multiple inspection items in which
the 2D-code read conditions have
been changed can be created and
registered as one scene.
Scene 2
Inspection for
product C
Scene 31
Inspection for
product Z
FQ User's Manual