Specifying Scan Settings For Copying; Adjusting Image Density; Selecting The Document Type According To Original - Ricoh M C251FW User Manual

4. Copying Originals

Specifying Scan Settings for Copying

This section describes how to specify image density and scan quality for the current job.

Adjusting Image Density

There are five image density levels. The higher the density level, the darker the printout.
1. Press the [Home] key.
2. Press the [Copier] icon on the [Home] screen.
3. Press [Text/Photo].
4. Press [ ] or [ ] to select the desired density level, and then press [OK].
• You can change the machine's default [Density] setting to always make copies with a specific
density level. For details, see page 217 "Copier Settings".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Reset Timer] while the
initial screen is displayed. For details, see page 251 "Administrator Tools Settings".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.

Selecting the Document Type According to Original

There are three document types:
120
ECC202