Setting In The Service Mode; Service's Choice - Konica Minolta Bizhub 162 Service Manual

Field Service Ver. 1.0 Apr. 2005
4.2

Setting in the Service Mode

4.2.1

SERVICE'S CHOICE

A. LOOP ADJUST (DUPLEX)
Purpose/Use To adjust the length of the loop formed in the paper before the Synchronizing Roller.
✽
When a skew feed, fold, or misfeed of paper occurs
✽
When variations in the amount of void on the leading edge occurs
Setting/
Setting range: -3.9 to 3.9 mm (1 step: 0.6 mm)
Procedure
Adjustment 1. Call Service's Choice of Service Mode to the screen.
Procedure 2. Select "Loop Adjust (Duplex)" and press the [Yes] key.
3. Using [ ▲ / ▼ ] key, select the desired setting value.
4. Press the [Yes] key to validate the setting value selected in step 3.
Adjustment Instructions
• Try a different setting value until there are no variations in the amount of void on
the leading edge, and paper skew, fold, or misfeed.
4. Service Mode
11