Starting/Exiting; Starting Procedure; Exiting Procedure; Changing The Setting Value In Service Mode Functions - Konica Minolta bizhub 164 Service Manual

Field Service Ver. 2.0 Jun. 2010

11.2 Starting/Exiting

11.2.1

Starting procedure

1. Press the Menu/Select key.
2. Press the following keys in this order.
Quick Settings →
3. The SERVICE MODE menu screen will appear.
11.2.2

Exiting procedure

• Press the Back/Stop/Reset key as many times as it is required to display the initial
screen.
11.2.3

Changing the setting value in SERVICE MODE functions

1. Select the desired item using [ / / / ] key.
2. Select the setting value using [ / / / ] key.
3. Validate the selection by pressing the Menu/Select key.
4. To go back to previous screen, press the Back/Stop/Reset key.

11.3 SERVICE'S CHOICE

11.3.1

SHIPMENT

A. Use
• To select the display of the fixed zoom ratios and paper sizes according to the applicable
marketing area.
• If this setting is changed, the following items are also changed.
- Default paper size (Inch/Metric)
- Fixed zoom ratio
- FLS paper size
- UTILITY MODE settings (Language, Tray Priority, Custom Size memory)
- Default zoom ration for 2in1/ 4in1 copy.
- Initial value of Custom size
B. Procedure
• The default setting is METRIC.
"METRIC"/INCH/TAIWAN/CHINA/L.AMERICA (METRIC)/L.AMERICA (INCH)
11.3.2

POWER SUPPLY

• Not used.
→ → Quick Settings →
11. SERVICE MODE
→
85