Service Mode; Service Mode Function Setting Procedure; Procedure; Exiting - Konica Minolta Bizhub 162 Service Manual

6. Service Mode

6. Service Mode
6.1

Service Mode function setting procedure

NOTE
• Care must be used to ensure that only the personnel who are involved in service
jobs know the procedure to enter the Service mode.
6.1.1

Procedure

1. Press the Utility key.
2. Press the following keys in this order.
3. Stop → 0 → 0 → Stop → 0 → 1
4. The Service mode menu screen will appear.
6.1.2

Exiting

• Press the Panel Reset key as many times as it is required to display the initial screen.
6.1.3

Changing the Setting Value in Service Mode Functions

1. Select the desired item using [ ▲ / ▼ ] key.
2. Select the setting value using [ ▲ / ▼ ] key, [ < / > ] key, or the 10-Key Pad.
3. Validate the selection by pressing the [Yes] key.
4. To go back to previous screen, press the [No] key.
20
Field Service Ver. 1.0 Apr. 2005