Copy Setting 1 - Konica Minolta Bizhub 162 Service Manual

Field Service Ver. 1.0 Apr. 2005
7.3.5

COPY SETTING 1

• COPY SETTING 1 is used to set the default values for different copy functions.
A. PAPER PRIORITY
Functions/Use • To set the priority paper source.
Setting/Procedure • The default setting is "1ST".
B. DENSITY PRIORITY
Functions/Use • To set the priority image quality mode and density that are selected when the
Setting/Procedure • The default setting is "TEXT/P" and "AUTO."
• "TEXT/P" means "TEXT/PHOTO."
C. DENSITY LEVEL (A)
Functions/Use • To set the density level when the Auto density is selected.
Setting/Procedure • The default setting is "0".
D. DENSITY LEVEL (M)
Functions/Use • To set the density level when the Manual density is selected.
Setting/Procedure • The default setting is "0".
E. BINDING POS
Functions/Use • To set the first page to be scanned when copies are made from a book, whether
Setting/Procedure • The default setting is "LEFT".
F. MARGIN SETTING
Functions/Use • To set the file margin width when making copies with a file margin.
Setting/Procedure • The default setting is "10" mm.
G. ERASE SETTING
Functions/Use • To set the erase width when making erase copies.
Setting/Procedure • The default setting is NORMAL "10" mm.
"1ST" 2ND 3RD
Power Switch is turned ON or the Panel Reset key is pressed.
Image quality mode : TEXT
Density
"0" Setting range : -1 (LIGHT) to +1 (DARK)
"0" Setting range : -4 (LIGHT) to +4 (DARK)
it is on the left or on the right.
"LEFT" RIGHT
"10" Setting range : 0 to 20 mm
"10" Setting range : 0 to 20 mm
4TH 5TH Multi Bypass
PHOTO "TEXT/P"
: "AUTO" MANUAL
7. Utility Mode
37