Counter - Konica Minolta Bizhub 162 Service Manual

8. Service Mode
M. ADF REG. LOOP2
• appears only when the DF-605 is installed.
☞ For details, see DF-605 Service Manual
Functions • To adjust the length of loop formed in the original before the Registration Roller.
Use • When a skew feed, fold, or misfeed of the original occurs
N. ATDC GAIN
Functions/Use • To set the automatic paper size detection function for CCD scan.
Setting/Procedure • The default setting is "155".
• The adjusted value of the ATDC Auto Adjust is the setting value.
O. MODEL SETTING
NOTE
• Never change this setting. If it is changed, the Tech. Rep. call (C03FF) will appear.
8.3.3

COUNTER

• COUNTER displays the counts of various counters.
A. TOTAL COUNTER
Functions/Use • To display the total count value of the selected mode.
Setting/Procedure 1: COPY
2: COPY DUPLEX
3: PRINT
4: PRINT DUPLEX
B. SIZE COUNTER
Functions/Use • To display the count of the Size Counter.
Setting/Procedure • To clear the count, use "Clear Data" of the Service mode.
C. PM COUNTER
Functions/Use • To display the count of the number of times each of different parts of the
• The count should be cleared when the corresponding PM part is replaced.
Setting/Procedure 1: BYPASS
2: TRAY1
3: TRAY2
4: TRAY3 (should not be used)
5: TRAY4 (should not be used only for Di1611)
6: TRAY5 (should not be used only for Di1611)
7: ADF (FEED)
8: ADF (REVERSE) (should not be used only for Di1611)
9: IR
10: OZONE
11: CLEANING
• To clear the count, use "Clear Data" of the Service mode.
78
"155" Setting range : 123 to 186
machine has been used.
Field Service Ver. 1.0 Apr. 2005