4. Firmware upgrade
4.
Firmware upgrade
4.1
Optional Duplexing Document Feeder (DF-605)
Firmware Upgrade
Print Lamp Display Section
16
1. Prepare the firmware upgrade EP-
ROM.
2. Turn OFF the power and remove the
Rear Cover.
4344D549AA
3. Insert the EP-ROM you prepared at
step 1 to the IC socket section of the
Control Board.
NOTE
• Ensure that the EP-ROM is installed
in the correct direction.
4. Turn ON the power.
4344D550AA
5. Check the firmware update status at
the Print Lamp Display Section of the
Duplexing Document Feeder.
Updating: Green and red light up alter-
nately.
Successful completion: Blinks in green.
Failure: Blinks in red.
✽ If failure occurs, redo the procedure
from step 3.
4344D551AA
6. After the firmware has been
upgraded successfully, turn OFF the
power and remove the EP-ROM that
was attached at step 3.
4344D552AA
Field Service Ver. 1.0 Apr. 2005