Konica Minolta Bizhub 162 Service Manual page 82

Field Service Ver. 1.0 Apr. 2005
Pulley C
Pulley C
4035D124AA
Pulley D
4035D125AA
4035D126AA
4035D122AA
16. Wind the lower cable of wire pulley 2
around pulley C.
17. Wind the cable from pulley C around
pulley D.
NOTE
• Wind the cable around the outer
groove in pulley D.
18. Pass the cable from pulley D into the
hole in the IR frame.
19. Pass the leading edge of each of the
front and rear cables into the space
between the IR frame and copier
frame.
20. Affix tape to temporarily secure the
cables to the copier frame.
6. Other
53