Function - Konica Minolta Bizhub 162 Service Manual

8. Service Mode
I. PCL RAM SIZE
• To display the PCL memory size.
• Only when the optional Printer Controller (IC-205) is mounted
J. SERIAL NO.
• To display the serial number of the machine.
K. CUSTOMER ID
• To display the customer ID of the machine.
8.3.5

FUNCTION

• FUNCTION allows the various service functions (paper feed test, image printing) to be
checked and adjustments to be made.
A. PAPER FEED TEST
Functions • To check for correct paper passage of the paper take-up and transport system
• Here are the details of operation involved in the paper passage motion.
• The Scanner does not make any scan motion.
• Paper is fed until the corresponding paper source runs out of paper.
• This test cannot be run with the Manual Bypass or Multiple Bypass (option).
• No counters are activated.
Use • When a paper misfeed occurs
Setting/Procedure 1. Select the paper tray.
2. Press the Start key to begin testing paper feeding.
3. Press the Stop key to stop testing paper feeding.
B. PROCESS CHECK
• HV output (for factory setting only) *Should not be used
C. ATDC AUTO ADJUST
Functions • To make an automatic adjustment of the ATDC Sensor.
Use • At setup
• When developer has been changed
• When IU has been replaced
Setting/Procedure 1. Press the [Yes] key to start the adjustment.
2. The adjustment sequence automatically stops as soon as the adjustment is
3. The sequence may be interrupted using the Stop key.
82
by letting the machine consecutively take up and feed paper without involving
actual printing action.
made.
Field Service Ver. 1.0 Apr. 2005