Paper Take-Up Misfeed - Konica Minolta Bizhub 162 Service Manual

9. Jam Display
9.2.2

Paper Take-Up Misfeed

A. Detection Timing
Type
The Separator Sensor (PC6-ADF) is not blocked even after the set period of time
Paper Take-Up
has elapsed after the Paper Take-Up Motor (M1-ADF) is energized.
Section misfeed
The Registration Sensor (PC9-ADF) is not blocked even after the set period of
detection
time has elapsed after the Paper Take-Up Motor (M1-ADF) is energized.
The Separator Sensor (PC6-ADF) is not blocked even after the set period of time
has elapsed after the Original Detection Sensor (PC8-ADF) is blocked by the
Detection of paper
paper.
remaining in the
Paper Take-Up
The Registration Sensor (PC9-ADF) is not blocked even after the set period of
section
time has elapsed after the Original Detection Sensor (PC8-ADF) is blocked by the
paper.
B. Action
Paper Take-Up Motor (M1-ADF)
Separator Sensor (PC6-ADF)
Registration Sensor (PC9-ADF)
Original Detection Sensor (PC8-ADF)
Step Operations
1 Initial checks
2 PC6-ADF sensor check
3 PC9-ADF sensor check
4 PC8-ADF sensor check
5 M1-ADF operation check
6 PBA-CONT replacement
36
Description
Relevant Electrical Components
Control Board (PBA-CONT)
Ref.
Page
☞
35
☞
31 PBA-CONT CN5CONT-11
☞
31 PBA-CONT CN6CONT-3
☞
31 PBA-CONT CN6CONT-6
☞
33
—
Field Service Ver. 1.0 Apr. 2005
WIRING DIAGRAM
Control signal (Electrical
Components)
—
—
—
Location
—
G-2
G-2
G-2
F-7
E-5