8. Service Mode
F. Latin America (Inch)
Setting name
REDUCTION2
REDUCTION1
EXPANSION1
EXPANSION2
G. OEM1 US
Setting name
REDUCTION2
REDUCTION1
EXPANSION1
EXPANSION2
8.3.9
FACTORY TEST
A. SIGNAL TEST
• This test is for factory adjustment only and should NOT be used.
B. RELAY TEST
• This test is for factory adjustment only and should NOT be used.
C. DIAL TEST
• This test is for factory adjustment only and should NOT be used.
D. VOLUME TEST
Functions/Use
• Buzzer issues sound correct.
Setting/Procedure <Step>
1. Press the Yes key, and a buzzer can be heard.
2. Pressing the
E. PANEL BUZZER TEST
Functions/Use
• To test LEDs and keys on control panel
Setting/Procedure PANEL LED TEST
• Make sure that all LEDs on control panel light (for 5 seconds).
PANEL SWITCH TEST
1. Press the control keys and numeric keys, and make sure that the names of
2. To release the test, press the panel reset key twice: The initial screen will be
F. RAM TEST
Functions/Use
• Write or read data to/from RAM memory to make sure of normal operation.
Setting/Procedure 1. Pressing the YES key will start the check.
2. After approx. 30 seconds, "RAM Chip is OK" will appear.
94
Default fixed zoom ratio
64%
78%
121%
129%
Default fixed zoom ratio
64%
77%
129%
155%
and
switches appear in the LCD display.
restored.
Field Service Ver. 1.0 Apr. 2005
Setting range
51% to 64%
65% to 99%
101% to 128%
129% to 199%
Setting range
51% to 64%
65% to 99%
101% to 154%
155% to 199%
keys will select the volume of High or Low.