Scanner Rails/Bearings; Ph Window; Pre-Image Transfer Lower Guide Plate - Konica Minolta Bizhub 162 Service Manual

Field Service Ver. 1.0 Apr. 2005
6.4.9

Scanner Rails/Bearings

6.4.10

PH Window

1. Remove the Front Cover, Left Cover, and Exit Tray.
☞ 31
6.4.11

Pre-Image Transfer Lower Guide Plate

4035D018AA
4035D019AA
4035D020AA
4035D043AA
4. Using a soft cloth dampened with
alcohol, wipe the CCD Sensor clean
of dirt.
1. Remove the Original Glass.
☞ 31
2. Using a soft cloth dampened with
alcohol, wipe the Scanner rails and
Bearings clean of dirt.
NOTE
• After the Scanner rails and Bear-
ings have been cleaned, apply oil
(copier lubricant A or FLOIL 947P).
2. Using a soft cloth dampened with
alcohol, wipe the PH window clean
of dirt.
1. Open the Right Door.
2. Using a soft cloth dampened with
alcohol, wipe the Pre-image Trans-
fer Lower Guide Plate clean of dirt.
6. Other
63