Utility Mode Function Setting Procedure; Procedure; Exiting; Changing The Setting Value In Utility Mode Functions - Konica Minolta Bizhub 162 Service Manual

5. Utility Mode
5.2

Utility Mode function setting procedure

5.2.1

Procedure

1. Press the Utility key.
2. The first Utility mode screen appears.
5.2.2

Exiting

• Press the Panel Reset key.
5.2.3

Changing the setting value in Utility Mode functions

1. Press the [ ▲ / ▼ ] key, [ < / > ] key or the 10-Key Pad to select the desired function.
2. Press the [ ▲ / ▼ ] key, [ < / > ] key or the 10-Key Pad to select the desired setting.
3. Press the [Yes] key to apply the setting.
4. To return to the previous screen, press the [No / C] key.
5.3

Setting in the Utility Mode

5.3.1

Network setting

• Depending on the network environment in which the machine is located, there may be
some restrictions on the network functions that the machine can use. Make the network
settings to suit the functions and environment required for customer's location. The net-
work settings can be specified from the control panel or using the administrator mode of
PageScope Web Connection.
A. IP ADDRESS
Purpose/Use This function is used to specify the IP address for the copier.
NOTES
• Available only if the NIC NC-502 is installed.
• Please consult customer's network administrator for information about the IP
address to use.
Setting/ • The default setting is "AUTO".
Procedure
• If AUTO is selected, the IP address is automatically acquired from the DHCP server.
NOTES
• AUTO is only enabled if there is a DHCP server available on the network.
• When AUTO is selected, there is no need to set the subnet mask or gateway
setting. When using a fixed IP address, IP Address in NVRAM must be
selected for PageScope Web Connection.
• Select this option from the "TCP/IP Configuration" menu on the "Network" tab.
• If SPECIFY is selected, the screen for entering the IP address appears.
8
"AUTO"
Field Service Ver. 1.0 Apr. 2005
SPECIFY