Konica Minolta Bizhub 162 Service Manual page 286

Field Service Ver. 1.0 Apr. 2005
AE. PROTOCOL REPORT
Functions/Use • Print communication report.
• Choose one from among the following.
Setting/Procedure • The default setting is "OFF".
T.30 communication report (example: V.17 communication)
NAME: ABC
TEL:886 3 4733507
DATE: APR.10'97 12:20
SESSION FUNCTION
0001 TX
TX RX
NSF
CSI
DIS
NSS
DCS
TCF
CFR
PIX
EOP
MCF
DCN
AF. CCD APS SIZE
Functions/Use • To set the automatic paper size detection function for CCD scan.
Setting/Procedure • The default setting is "PATTERN1".
AG.GDI TIMEOUT
Functions/Use • To specify the time for timeout when data from PC is interrupted during GDI
Setting/Procedure • The default setting is "6" (60 sec).
"OFF" : Disable T.30 communication report.
ON : Print T.30 communication report.
ON (ERROR) : Print T.30 communication report when an error occurs.
PROTOCOL MONITOR REPORT
NO DESTINATION STATION
ABC
01
22345678901234567890
FF 03 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
FF 03 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
FF 13 40 00 00 00 00 00
FF 03 00 00 00 00 00 00 00 00 00 00 00
FF 03 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00
FF 13 84
FF 13 BF 2F 00 00 41
FF 13 8C
FF 13 FB
"PATTERAN1" PATTERN2
printing.
0 (5 sec.) 1 (10 sec.)
4 (40 sec.) 5 (50 sec.)
DATE TIME PAGE DURATION
DEC.02 15:00 008 00:00'11"
DATA
2 (20 sec.) 3 (30 sec.),
"6" (60 sec.)
8. Service Mode
MODE RESULT
ECM-12 OK
69