U620 Setting The Remote Switching Mode One - Kyocera ECOSYS M2030dn/PN Service Manual

Item No.
U612 Selecting if detection of trail edge margin is to be performed
This determines whether trailing edge margin is detected (to prevent image from being mutilated)
while printing a received Fax.
1. Select the setting using the cursor left/right keys.
Display
ON
OFF
* : Initial setting: ON
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U620 Setting the remote switching mode
Description
Sets the signal detection method for remote switching. Be sure to change the setting according to
the type of telephone connected to the machine.
Setting
1. Press the start key.
2. Select [REMORT MODE] and press the start key.
3. Select the mode using the cursor up/down keys.
Display
ONE
CONT
* : Initial setting: ONE
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
The trail edge margin is detected.
The trail edge margin is not detected.
Description
One-shot detection
Continuous detection
1-3-52
2PK/2PL/2PM/2PN