Removing And Reinstalling The Main Paper Exit Opening Cover; Removing And Reinstalling The Booklet Paper Exit Opening Cover - Konica Minolta FS-110 Service Manual

[8] Removing and Reinstalling the Main
Paper Exit Opening Cover
Caution:
Make sure that the power cord of the main
body is unplugged from the power outlet.
a. Procedure
(1) Remove the following parts:
• Top cover/1 or optional PI (if installed)
• Top cover/2
• Side cover
• Rear cover
• Main tray
(2) Remove four screws and detach the main paper
exit opening cover.
Main paper exit opening cover
(3) Reinstall the above parts following the removal
steps in reverse.
[9] Removing and Reinstalling the Book-
Screws
Screws
3-5
let Paper Exit Opening Cover (FS-210
ONLY)
a. Procedure
(1) Remove the booklet tray.
(2) Remove two screws and detach the booklet
paper exit opening cover.
(3) Reinstall the above parts following the removal
steps in reverse.
FS-110/FS-210
Booklet paper exit
opening cover
Screws