Table of Contents
Advertisement
[6] M713 (stacker entrance) Control
MAIN BODY
M713 (stacker entrance) drives the stacker
entrance roller and the swing belt. These com-
ponents are responsible for conveying the paper
to the stacker, aligning the paper rear end, and
controlling the timing for stapling.
The FNS CB (FNS control board) controls the
operation of M713 through the RB (relay board).
The related signals are PS704 (FNS entrance),
PS705 (stacker entrance), and PS725 (folding
paper exit).
1. Operation
a.
Staple mode (for sheets of all paper sizes
except A4, B5, and 8.5 x 11 = without by-pass
feature)
The FNS operation signal from the main body
lets M713 (stacker entrance) start to rotate at a
high-speed.
When PS705 (stacker entrance) has detected
the rear end of the paper, the rotation speed of
M713 changes to low, conveying the paper
slowly to the stacker. Then, after a predefined
time has elapsed, the rotation returns to the high-
speed mode to prepare for the next conveyance
of paper.
When the last sheet of the set has passed
through and the stapling operation has started,
M713 stops.
24V
M713 CLK
M713 DRV A
M713 RESET
M713 DRV A
M713 CONT
M713 DRV B
M713 DRV B
PS705 IN
PS725 IN
5V
PS704 IN
PS704
GND
FNS CB
When M708 (paper exit) has closed the opening,
the rotation of M713 changes to a high speed to
prepare for the conveyance of the paper to be
stapled.
b. Staple mode (for sheets of paper sizes A4,
B5, and 8.5 x 11 = with by-pass feature)
(1) Sheets of the first set
The sheets of the first set are processed in the
same way as in the staple mode described
above (for sheets of all paper sizes except A4,
B5, and 8.5 x 11 = without by-pass feature).
(2) First sheets of the second and subsequent sets
When PS705 (stacker entrance) has detected
the rear end of the last sheet of the first set, and
a predefined time period has elapsed, M713
(stacker entrance) stops. This action ensures
that the stapling of the first set completes before
the sheets of the second set are fed to the
stacker section (the first sheet waits on the by-
pass channel).
2-25
FS-110/FS-210
24V
24V
M713
5V
PS705 IN
PS705
GND
5V
PS725 IN
PS725
GND
RB
Advertisement
Table of Contents
