Removing And Reinstalling The Main Tray - Konica Minolta FS-110 Service Manual

FS-110/FS-210
[7] Removing and Reinstalling the Main
Tray
Caution:
After you have lowered the main tray, be
sure to unplug the power cord of the main
body from the power outlet.
a. Procedure
(1) Push up the actuator of the main tray exit with
your finger to lower the main tray.
Actuator
Paper exit roller
(2) Turn the main body's main power switch (SW1)
OFF, and unplug the power cord from the power
outlet.
Paper exit roller
Main tray
3-4
(3) Remove the two mounting screws.
(4) Lift the main tray and detach it from the hooks of
the up/down stay.
(5) Reinstall the above parts following the removal
steps in reverse.
Main tray
Screws
Up/down stay