Mechanism - Konica Minolta FS-110 Service Manual

FS-110/FS-210

[2] Mechanism

Mechanism
Stack*1
Paper exit belt*2
Booklet stopper*3
Paper alignment/U*4
Paper alignment/L*5
*1 Stack
The stacker section features a compact compo-
nent design using the stack with an inclination of
70 degrees. The corrugation roller is employed
for the stacker entrance roller, which facilitates a
smooth paper delivery to the stacker. The paper
sinks under its own weight into the stacker, of
which lower end is supported by the swing belt.
Stacker no paper PS
(PS720)
70 degrees
Method
Corrugation roller
Swing belt + own
weight
Timing belt driven by
coupling connection
Driven by timing belt
using stepping motor
(the flat stapling stop-
per is released by the
interlocking mecha-
nism)
Stepping motor
Stepping motor
Paper
Stacker entrance motor
(M713)
Stacker entrance PS
(PS705)
Swing belt
2-18
*2 Paper Exit Belt
The paper exit arm delivers the paper to the main
tray in the staple mode, or to the folding section
in the three-folding mode. The paper exit arm is
driven by the paper exit belt, which is in turn
driven by the paper exit roller motor (M707)
through the coupling connection.
The paper exit belt HP PS (PS709) detects the
home position of the paper exit arm.
Paper exit roller motor
(M707)
Coupling pin
Paper exit belt HP PS
(PS709)
Paper exit arm
Paper exit belt