Mechanism - Konica Minolta FS-110 Service Manual

[2] Mechanism

Mechanism
Gate switching*1
By-pass gate*2
Shift mechanism
of the shift unit*3
Open/close of
paper exit open-
ing*4
Paper exit opening
nip*5
*1 Gate Switching
The two gates (/U and /L) switch the paper path
to three directions: the sub-tray, the main tray,
and the stacker section. The upper and lower
gates (/U and /L) are driven by the gate cam,
which is driven by the gate drive motor (M712).
Gate HP PS (PS716)
Method
Driven by the stepping
motor/cam.
Solenoids
Crank mechanism
Crank mechanism
Pressure rollers driven by
solenoid.
Gate drive motor (M712)
Gate cam
Gate/L
Gate/U
The gate cam consists of two cams (/U and /L) on
the same shaft. The position of the cams deter-
mines the paper path.
To sub-tray
Gate/U
Gate/L
To stacker section
To main tray
2-3
FS-110/FS-210
Gate HP PS (PS716)
Cam/U
Cam/L
Sub-tray paper exit
Stacker section
paper exit
Main tray paper exit