FS-110/FS-210
[3] Removing and Reinstalling the Top
Cover/2
Caution:
Make sure that the power cord of the main
body is unplugged from the power outlet.
CAUTION: Uninstall the PI (optional) if installed.
a.
Procedure
(1) Remove the top cover/1.
(2) Open the front door.
(3) Remove four screws, and pull out the sub-tray.
Then remove the top cover/2.
Top cover/2
Front door
(4) Reinstall the above parts following the removal
steps in reverse.
Sub-tray
Screws
Screws
3-2
[4] Removing and Reinstalling the Side
Cover
Caution:
Make sure that the power cord of the main
body is unplugged from the power outlet.
a.
Procedure
(1) Open the front door.
(2) Remove three screws, and remove the side
cover.
Screws
(3) Reinstall the above parts following the removal
steps in reverse.
Side cover