Removing And Reinstalling The Front Door; Removing And Reinstalling The Rear Cover - Konica Minolta FS-110 Service Manual

[5] Removing and Reinstalling the Front
Door
Caution:
Make sure that the power cord of the main
body is unplugged from the power outlet.
a. Procedure
(1) Open the front door.
(2) Remove the two mounting screws holding the
hinge plate at the bottom, and remove the front
door.
Front door
(3) Reinstall the above parts following the removal
steps in reverse.
Screws
Hinge plate
[6] Removing and Reinstalling the Rear
Cover
Caution:
Make sure that the power cord of the main
body is unplugged from the power outlet.
a. Procedure
(1) Remove the six mounting screws, and detach
the rear cover.
Rear cover
(2) Reinstall the above parts following the removal
steps in reverse.
3-3
FS-110/FS-210
Screw
Tab