Konica Minolta FS-110 Service Manual page 25

For sheets of A4, B5, and 8.5 x 11:
(1) The first set is stapled and delivered to the main tray in the same manner as sheets of all size except A4,
B5, and 8.5 x 11.
(2) As the front of the first set is being discharged, the stacker entrance roller stops and the by-pass gate
opens. The first sheet of the second set (and subsequent sets) is conveyed to the stacker entrance.
(3) The by-pass gate closes, and a second sheet is laid over the first sheet which is fixed by the stacker
entrance roller.
(4) When the front of the first set has been delivered, the stacker entrance roller starts to rotate. The first and
second sheets are conveyed to the stacker.
(5) The alignment plate/U lines up each sheet in the widthwise direction.
(6) When all sheets are stacked, they are stapled with the stapler and the clincher.
(7) The set of stapled sheets is delivered by the paper exit arm to the main tray.
(8) Steps (2) through (7) are repeated for each set of sheets.
Main tray
Alignment plate/U
Paper exit belt
Stapler
Paper exit arm
Paper exit opening unit
Second
sheet
Flat-stapling stopper
1-15
FS-110/FS-210
Entrance roller
Gate
Conveyance roller/A
Conveyance roller/B
First sheet
By-pass gate
Intermediate
conveyance roller
Stacker entrance roller
Intermediate conveyance
roller
Clincher