Advertisement
①
③
③
①
✍
4348U023AD
4348U100AC
4348U102AB
①
③
③
✍
①
4348U024AD
4348U101AC
4348U102AB
2. Install the Fixing Legs at two locations in the
front shown in the illustration (six screws
✍
furnished with the Paper Feed Cabinet).
3. Install the Fixing Leg Covers at two locations
in the front shown in the illustration
(2 Pieces).
NOTES
• Insert the Fixing Leg Covers in the direc-
tion shown by arrow until they click into
position.
• Insert the Protruded Portions of the cover
shown by the arrows into the Fixing Leg.
4. Install the Fixing Legs at two locations in the
rear shown in the illustration (six screws
furnished with the Paper Feed Cabinet).
✍
5. Install the Fixing Leg Covers at two locations
in the rear shown in the illustration
(2 Pieces).
NOTES
• Insert the Fixing Leg Covers in the direc-
tion shown by arrow until they click into
position.
• Insert the Protruded Portions of the cover
shown by the arrows into the Fixing Leg.
PC-101
■ Loading Paper
4348U048AA
4348U095AA
4348U091AA
NOTES
• Make sure that the top level of the paper stack does not exceed the
level indicator.
• Slide the Edge Guide tightly up against the edge of the paper stack so that there is
no gap between them.
• With the Trailing Edge Stop, fit its locking tab properly into the slit at the correct
paper size position.
• Correct any curl in the paper before loading.
– 4 –
1. Slide out the 3rd Drawer.
2. Load the paper stack so that it rests below
the tab fitted to the Edge Guide.
▼
(MAX) paper
Advertisement
