Staple Mode - Konica Minolta FS-110 Service Manual

FS-110/FS-210

[5] Staple Mode

For sheets of all size except A4, B5, and 8.5 x 11:
(1) The gates are set to the position to carry paper to the stacker.
(2) If paper is larger than A4R, the paper exit opening will open.
(3) Each sheet is carried to the flat-stapling stopper and its vertical position (feeding direction) is adjusted.
(4) The horizontal position (widthwise direction) of each sheet is adjusted by the alignment plate/U.
(5) When all necessary sheets are stacked, they are stapled with the stapler and the clincher.
(6) The set of stapled sheets is delivered by the paper exit arm to the main tray.
(7) Steps (3) through (6) are repeated for each set of sheets to be stapled.
Main tray
Alignment plate/U
Paper exit belt
Swing belt
Stapler
Paper exit arm
Flat-stapling stopper
Paper exit opening unit
Gate
Intermediate conveyance roller
1-14
Entrance roller
Conveyance roller/A
Conveyance roller/B
Stacker entrance roller
Clincher