Table of Contents
Advertisement
FS-110/FS-210
b. Staple mode (for papers whose length in the
feeding direction is smaller than B5R)
The FNS operation signal from the main body
lets M707 (paper exit roller) rotate. When PS709
(paper exit belt HP) signal has changed from
OFF to ON and a predefined time period has
elapsed, M707 stops. The paper exit arm moves
to the staple mode HP.
When the stapling operation has been com-
pleted, M707 rotates to drive the paper exit belt
of the stacker section. This action allows the
paper exit arm to lift the paper to the level of the
paper exit roller, which delivers it to the main tray.
When PS709 detects the change in signal, from
OFF to ON, M707 stops.
c.
Staple mode (other than those above)
The FNS operation signal from the main body
lets M707 (paper exit roller) rotate. When PS709
(paper exit belt HP) signal has changed from
OFF to ON and a predefined time period has
elapsed, M707 stops. The paper exit arm moves
to the staple mode HP.
When paper other than those described above is
used, the paper exit opening is open. The paper
exit opening is closed by M708 upon the com-
pletion of stapling. When PS712 (paper exit
opening HP) detects that the paper exit opening
has been closed, M707 starts rotating to drive
the paper exit arm. This allows the paper exit arm
to lift the paper to the level of the paper exit roller,
which delivers it to the main tray.
When PS709 detects the change in signal, from
OFF to ON, M707 stops.
d. Folding and stitch-and-fold modes
The FNS operation signal from the main body
lets M707 (paper exit roller) counter-rotate.
When PS709 (paper exit belt HP) signal has
changed from OFF to ON, M707 stops. The
paper exit arm moves to the booklet mode HP.
When the stapling operation has completed, the
paper is moved to the folding position. At this
stage, the paper exit arm will not operate. This is
because the paper exit arm may come into con-
tact with the paper, which is waiting for a process
at the folding position
e.
Three-folding mode
The FNS operation signal from the main body
lets M707 (paper exit roller) counter-rotate.
When PS709 (paper exit belt HP) signal has
changed from OFF to ON, M707 stops. The
paper exit arm moves to the booklet mode HP.
When the paper alignment has been completed,
M707 (paper exit roller) counter-rotates helping
the paper to be carried to the three-folding posi-
tion. When PS709 signal has changed from OFF
to ON, M707 stops.
2-10
Advertisement
Table of Contents
