Table of Contents
Advertisement
FS-110/FS-210
(3) Remove two screws. Detach the wire bracket on
the rear from the up/down stay.
Up/down
wire
Wire
Up/down stay
bracket
(4) Loosen the two screws on the belt tensioner.
Belt tensioner
Screw
Screws
(5) Remove the E-ring and the up/down pulley/L.
Then remove the up/down wire.
CAUTION: When you remove the up/down pul-
ley, the pin falls. Be careful not to lose
the pin.
Up/down pulley/L
E-ring
(6) Temporarily attach the wire bracket to the up/
down stay with two screws.
CAUTION: The wire bracket must be installed
with the longer portion of the wire
facing upward.
Longer portion of wire
Up/down wire
Shorter portion of wire
3-10
Pins
Up/down wire
Gear
Up/down stay
Screw
Wire bracket
fs2103001
Advertisement
Table of Contents
