Table of Contents
Advertisement
FS-110/FS-210
[3] Stapler Movement Control
MAIN BODY
The stapler/F and the stapler/R move horizon-
tally in opposite directions each other. In addi-
tion, the stapler/R rotates up to 45
the current staple mode.
The horizontal movement of the staplers is per-
formed by M711 (stapler movement), whereas
the rotation is performed by M704 (clincher rota-
tion) and M706 (staple rotation).
The FNS CB (FNS control board) controls the
operations of M711, M704, and M706 through
the RB (relay board).
The related signals are PS711 (stapler move-
ment HP), PS713 (stapler rotation HP), and
PS714 (clincher rotation HP).
M704 DRV A
M704 DRV A
M704 DRV B
M704 DRV B
PS714 IN
M706 DRV A
M706 DRV A
M706 DRV B
M706 DRV B
PS713 IN
M711 DRV A
M711 DRV A
M711 DRV B
M711 DRV B
PS711 IN
FNS CB
1. Operation
a.
Single staple (front)
°
according to
The FNS operation signal from the main body
activates M711 (stapler movement) to carry the
staplers to extend the distance between the sta-
plers and the clinchers, and then M711 stops at
the appropriate positions.
When PS706 (main tray paper exit) has detected
the last sheet and a predefined time period has
elapsed, M711 is activated again to move the
staplers to the home position, and M711 stops
when PS711 (stapler movement HP) turns ON.
2-30
M704 DRV A
M704 DRV A
M704
M704 DRV B
M704 DRV B
5V
PS714 IN
PS714
GND
M706 DRV A
M706 DRV A
M706
M706 DRV B
M706 DRV B
5V
PS713 IN
PS713
GND
M711 DRV A
M711 DRV A
M711
M711 DRV B
M711 DRV B
5V
PS711 IN
PS711
GND
RB
Advertisement
Table of Contents
