Table of Contents
Advertisement
2. Signals
a.
FNS CB input signals
PS718 IN (PS718 to FNS CB)
Signal relating to the shift position
[L] to [H]: Straight position
[H] to [L]: Shift position
b. FNS CB output signals
(1) M702 DRV (FNS CB to M702)
Signal to drive/control M702.
[L]: M702 ON
[H]: M702 OFF
[7] M707 (paper exit roller) Control
MAIN BODY
M707 (paper exit roller) drives the main tray
paper exit roller and the paper exit belt of the
stacker section.
The FNS CB (FNS control board) controls M707.
The related signals are PS704 (FNS entrance),
PS706 (main tray paper exit), PS709 (paper exit
belt HP), and PS712 (paper exit opening HP).
1. Operation
a.
Straight, sort, and group modes
When PS704 (FNS entrance) detects the lead-
ing edge of the paper, M707 starts to rotate at a
high speed. When PS704 has detected the trail-
ing edge of the paper and a predefined time
period has elapsed, the rotation of M707
changes to low. Then the paper delivery action is
performed.
When PS706 (main tray paper exit) has detected
the trailing edge of the paper (preparation for the
next paper conveyance) and a predefined time
period has elapsed, the rotation speed of M707
returns to high.
When PS704 has detected the last paper and a
predefined time period has elapsed, M707
ceases to rotate.
2-9
FS-110/FS-210
5V
M707 P/S
M707 CLK
M707 F/R
M707
M707 LD
PGND
PGND
24V
24V
5V
PS704 IN
PS704
GND
5V
PS706 IN
PS706
GND
5V
PS709 IN
PS709
GND
5V
PS712 IN
PS712
GND
FNS CB
Advertisement
Table of Contents
