Mechanism - Konica Minolta FS-110 Service Manual

FS-110/FS-210

[2] Mechanism

Mechanism
Stapler horizontal
movement*1
Stapler/clincher rota-
tional movement*2
Stapling*3
*1 Stapler horizontal movement
The stapler movement motor (M711) drives the
timing belts. The stapler/R is attached to the
upper part of one timing belt. Also the clincher/R
is attached to the upper part of another timing
belt. The stapler/F and the clincher/F are
attached to the lower part of each timing belt.
Stapler movement HP PS (PS711)
Stapler
Stapler movement HP PS (PS711)
Method
Interlocked mecha-
nism by stapler and
clincher with stepping
motor and timing belt
Stepping motor Ball
locking mechanism
Flat clinch
Clincher
2-28
*2 Stapler/clincher rotational movement
The stapler/R and clincher/R are rotatable up to
°
45 for the single staple (rear).
The stapler rotation motor (M706) rotates the
stapler/R. The clincher rotation motor (M704)
rotates the clincher/R.
The ball lock mechanism locks the stapler/
clincher at angles of 0
Stapler rotation motor (M706)
Clincher rotation motor (M706)
Stapler rotation HP PS
(PS713)
Clincher rotation HP PS (PS714)
Ball
Locked
° °
or 45 .
Spring
Released