Stapler Section; Removing And Reinstalling The Stapler Unit Cover - Konica Minolta FS-110 Service Manual

STAPLER SECTION

[1] Removing and Reinstalling the Sta-
pler Unit Cover
Caution:
Make sure that the power cord of the main
body is unplugged from the power outlet.
Caution:
Be careful when you detach the FNS from
the main body. If you pull out the stacker
unit, the FNS may fall. This may cause
injury.
a. Procedure
(1) Open the front door.
(2) Draw the stacker unit out.
Stacker unit
(3) Remove the two screws securing the rail stopper.
Further pull the stacker unit out.
CAUTION: Place something under the drawn
stacker unit to prevent the FNS from
falling due to the weight of the unit.
Stacker units
Support preventing the falling of the FNS
(4) Remove five screws and detach the cover.
(5) Reinstall the above parts following the removal
steps in reverse.
3-15 3-17
FS-110/FS-210
Screw holding the
rail stopper
Screw
Stapler unit cover