Konica Minolta FS-110 Service Manual page 54

FS-110/FS-210
2. Signals
a. FNS CB input signals
(1) PS723 IN (PS723 to RB to FNS CB)
Signal relating to the detection of the booklet
stopper's home position
[L]: Not in the home position
[H]: In the home position
(2) PS725 IN (PS725 to RB to FNS CB)
Signal relating to the detection of the paper at the
folding paper exit position
[L]: Paper not detected
[H]: Paper detected
b. FNS CB output signals
(1) M718 CLK (FNS CB to RB)
Signal relating to the clock for controlling the
rotation speed of the M718
(2) M718 RESET (FNS CB to RB)
Reset signal for the M718
(3) M718 F/R (FNS CB to RB)
Signal to control the rotation direction of the
M718
[L]: CCW
[H]: CW
(4) M718 CONT (FNS CB to RB)
Signal to activate or deactivate the M718
[L]: M718 ON
[H]: M718 OFF
c. RB output signals
(1) M718 DRV A, A (RB to M718)
Pulse signal to drive/control the Phase A of
M718
(2) M718 DRV B, B (RB to M718)
Pulse signal to drive/control the Phase B of
M718
2-24