Ricoh D025 Service Manual page 547

Rev. 10/06/2010
Note 1
If a problem always occurs in a specific condition (for example. printer driver setting, image
file), the problem may be caused by a software error. In this case, the following data and
information needs to be sent back to your product specialist. Please understand that it may
take some time to get a reply on how to solve the problem, because in some cases the
design staff in Japan must analyze the data.
Symptom / Possible Causes / Action taken
Summary sheet (SP mode "Printer SP", SP1-004 [Print Summary])
SMC - All (SP5-990-001)
SMC - Logging (SP5-990-004)
Printer driver settings used when the problem occurs
All data displayed on the screen (SC code, error code, and program address where the
problem is logged.)
Image file which causes the problem, if possible
SM Appendix 3-95
SC Tables
D023/D025