Ricoh D025 Service Manual page 667

Page: Stand-By: FC
Adjusts the threshold of the line position adjustment for BW printing mode in
007
stand-by mode. The line position adjustment is done when the number of
outputs in color printing mode reaches the value specified with this SP and the
condition of SP2-193-008 or SP2-193-009 is satisfied.
Temp.
008 Adjust the temperature change threshold for the line position adjustment
(Mode b: adjustment once). The timing for line position adjustment depends on
the combinations of several conditions. Section Descriptions" section.
Time
009 Adjust the time threshold for the line position adjustment (Mode b: adjustment
once). The timing for line position adjustment depends on the combinations of
several conditions.
Magnification
010 Adjusts the magnification threshold for line position adjustment. If the length of
the main scan is changed by this amount since the previous MUSIC, then
MSUIC is done again.
Temp. 2
011 Adjust the temperature change threshold for the line position adjustment
(Mode a: adjustment twice). The timing for line position adjustment depends on
the combinations of several conditions.
Time 2
012 Adjust the time threshold for the line position adjustment (Mode a: adjustment
twice). The timing for line position adjustment depends on the combinations of
several conditions.
013 Page: Power ON:BW+FC
SM Appendix
*ENG
[0 to 999 / 100 / 1 page/step]
*ENG
[0 to 100 / 5 / 1deg/step]
*ENG [1 to 1440 / 300 / 1 minute/step]
*ENG [0 to 10 / 1 / 0.01%/step]
*ENG [0 to 100 / 10 / 1deg/step]
*ENG
[1 to 9999 / 600 / 1 minute/step]
*ENG [0 to 999 / 200 / 1 page/step]
8-71
System Service Mode
D023/D025