Ricoh D025 Service Manual page 671

[Development DC Vias] Development DC Bias Adjustment
Adjusts the development bias.
Development bias is automatically adjusted during process control; therefore,
adjusting these settings has no effect while Process Control (SP3-041-001
2229
Default: ON) is activated.
After deactivating Process Control with SP3-041-001, the values in these SP
modes are used for printing.
Plain: 154 mm/sec, Thick 1 and Thick 2&Fine: 77 mm/sec
001 Plain: Bk
002 Plain: M
003 Plain: C
004 Plain: Y
005 Thick 1: Bk
006 Thick 1: M
007 Thick 1: C
008 Thick 1: Y
009 Thick 2: Bk
010 Thick 2: M
011 Thick 2: C
012 Thick 2: Y
013 Fine: Bk
014 Fine: M
015 Fine: C
016 Fine: Y
SM Appendix
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 800 / 550 / 10 –V/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
8-75
System Service Mode
D023/D025