Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2851 is multiplied by these SP values.
005-008
The paper leading edge area can be adjusted with SP2872.
005 Separation DC: Thick 1: 1st Side
006 Separation DC: Thick 1: 2nd Side
007 Separation DC: Thick 1: 1st Side
[Special 3: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2872
plate at the paper leading edge between the erase margin area and the image
area.
Thick 1 and Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: Thick 1: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: Fine: 1st Page
008 Separation DC: Thick 1: 1st Side
SM Appendix
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
8-131
System Service Mode
D023/D025