Ricoh D025 Service Manual page 634

System Service Mode
2105 [LD Power Adj.] (Process Speed, Color)
Adjusts the LD power of each color for each process speed.
Each LD power setting is decided by process control.
High Speed: 154 mm/sec, Middle Speed: 111 mm/sec,
Low Speed: 77 mm/sec
001 High Speed: Bk
002 High Speed: M
003 High Speed: C
004 High Speed: Y
005 Middle Speed: Bk
006 Middle Speed: M
007 Middle Speed: C
008 Middle Speed: Y
009 Low Speed: Bk
010 Low Speed: M
011 Low Speed: C
012 Low Speed: Y
2106 [Polygon Rotation Time]
Adjusts the time of the polygon motor rotation. DFU
001 Warming-Up
002 Job End
D023/D025
*ENG
*ENG
*ENG
*ENG
*ENG
[50 to 120 / 100 / 1%/step]
Decreasing a value makes lines thinner
*ENG
on the output.
*ENG
Increasing a value makes lines thicker
on the output.
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 60 / 10 / 1 sec/step]
*ENG
8-38 SM Appendix