Ricoh D025 Service Manual page 702

System Service Mode
[Thick 2: Leading Edge Correction] Thick 2 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
2571
edge in each mode. SP2553 and SP2558 are multiplied by these SP values.
The paper leading edge area can be adjusted with SP2572.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2551 is multiplied by these SP values.
2571
The paper leading edge area can be adjusted with SP2572.
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
[Thick 2: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2572
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
003 Separation DC: 1st Page
004 Separation DC: 2nd Page
D023/D025
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2mm/step]
*ENG
*ENG
8-106 SM Appendix