Ricoh D025 Service Manual page 843

[Free Run]
Performs a free run on the copier engine.
The machine starts free run in the same condition as the sequence
5802
of A4/LT, A3 or A4 SEF printing from the 1st or 2nd tray. Therefore,
the correct paper should be loaded in the 1st tray or 2nd tray, but
paper is not fed.
The main switch has to be turned off and on after using the free run
mode for a test.
001 TRAY1: A4LEF: FC
002 TRAY2: A3: FC
003 TRAY2: A4SEF: FC
5803 [Input Check]
5804 [Output Check]
5805 [Anti-Condensation Heater]
002 0:OFF / 1:ON
[SC Reset]
Resets a type A service call condition.
5810
Turn the main switch off and on after resetting the SC code.
001 Fusing SC Reset
SM Appendix
-
-
-
-
- See "Input Check Table" in this section.
- See "Output Check Table" in this section.
*ENG
[0 or 1 / 0 / -]
- -
8-247
System Service Mode
D023/D025