Ricoh D025 Service Manual page 777

3520 [ITB Idling Number]
001 Temperature: H
002 Temperature: M
003 Temperature: L
004 Temperature: L: Power ON
3521 [Temperature Threshold]
001 Threshold: t2
002 Threshold: t1
[Initial Process Control Setting]
Adjusts the threshold for the process control at power on.
3522
When the current condition has changed by more than the values of these SPs
when compared with the conditions at the previous operation, the process
control at power on is executed.
002 Non-use Time Setting
003 Temperature Range
004 Relative Humidity Range
005 Absolute Humidity Range
[Rapi_timer]
100
[Time Setting]
SM Appendix
*ENG
*ENG
[0 or 3 / 0 / 1 revolution/step]
*ENG
*ENG
*ENG [20 or 30 / 25 / 1 deg/step]
*ENG [0 or 15 / 15 / 1 deg/step]
*ENG
[0 to 1440 / 360 / 1 minute/step]
*ENG [0 to 99 / 10 / 1°C/step]
*ENG [0 to 99 / 50 / 1 %RH/step]
*ENG [0 to 99 / 6 / 1 g/m
*ENG [0 to 255 / 30 / 1 sec/step]
8-181
System Service Mode
3
/step]
D023/D025