Ricoh D025 Service Manual page 690

System Service Mode
[Thin: Trailing Edge Correction] Thin Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2453 and SP2457 are multiplied by these
2473
SP values.
Plain: 154 mm/sec, Fine: 77 mm/sec
The paper trailing edge area can be adjusted with SP2474.
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: Plain: 1st Side
005 Separation DC: Plain: 1st Side
007 Separation DC: Plain: 1st Page
[Thin: Switch Timing: Trail. Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2474
plate at the paper trailing edge between the erase margin area and the image
area.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: Plain: 1st Side
005 Separation DC: Plain: 1st Side
007 Separation DC: Plain: 1st Page
D023/D025
*ENG
[0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 50 / 0 / 1 mm/step]
*ENG
8-94 SM Appendix